P3215, Fire Retardant, Single Coated Tape, Scapa Tapes North America, adhesive tape datasheet

Home >

Scapa Tapes North America P3215
Fire Retardant, Single Coated Tape

General Information

P3215 is a 9 mil, fire retardant, single coated tape. It is primarily used as a tough, effective, moisture barrier in galley and lavatory areas to contain spills and prevent structural corrosion where fire safety is also a concern on board aircraft.

Backing	Adhesive (unwind)	Thickness (total)	Liner Type (outer)
PE - Polyethylene	Rubber	9.00 mil

Adhesion to Steel 180° Peel	Adhesive Activation	Tensile Strength	Elongation Percent
50.00 oz/in	Pressure	20.00 lbs/in	70.00%

Min Application Temp	Min Service Temp	Max Short-Term Temp	Max Long-Term Temp
65 °F	0 °F	150 °F

Adhesive Tape Features

High adhesion prevents lifting and curling
Polyethylene release liner eliminates the tearing associated with paper liners
Durable backing prevents wear in high traffic areas
Highly conformable to accomodate angles and turns
Maintains seal and prevents creeping
Acts as a waterproof barrier to contain spills and prevent corrosion
Complies with F.A.R.25.853(a)
Nominal weight (excluding liner): 7.5 oz./sq. yd.
Liner: easy release, white polyethylene 0.003 in. thick
backing adhesion (ASTM D-1000): = 35 oz/in
Flammability data - F.A.R.25853(a) 12 seconds vertical test
Flame time: 15 sec. max.
Burn length: 8 in. (203 mm) max.
Flaming time of drippings: 5 sec. max.
White rubber adhesive

Adhesive Tape Applications

Forms a tough, effective, moisture barrier in galley and lavatory areas on board aircraft to contain spills and prevent structural corrosion where fire safety is also a concern.

Adhesive Tape Markets Served

Adhesive Tape Colors

Black

Comparable products

Scapa Tapes North America P3215

Fire Retardant, Single Coated Tape

Backing	Adhesive	Thickness	Adhesion
PE - Polyethylene	Rubber	9.00mil	50.00oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Converting Options

Converting Services

Budnick Converting offers a number of services to take the product you need and make it perfect for your application. With converting methods ranging from precision slitting or die-cutting to printing and coating, Budnick has the capabilities to create anything you can dream up.

Services

Precision Cutting

Die-Cutting

Slitting

Printing

Adhesive Coating

Finishing and Spooling

Next Steps

Learn More About Budnick

Contact Us

View Case Studies

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.