Call 800-282-0090


Home > Data Sheet
Scapa Tapes North America 574
Modified Silicone Fume Protection Tape

General Information
574 is a 2.0 mil, modified silicone fume protection tape. It is primarily used for protection of printed circuit boards from chemical fumes or splashes during the plating or stripping of gold contact fingers.
Backing Adhesive
(unwind)
Thickness
(total)
Liner Type
(outer)
PET - Polyester Silicone 2.00 mil  

Adhesion to Steel
180° Peel
Adhesive Activation Tensile Strength Elongation Percent
20.00 oz/in Pressure 25.00 lbs/in 90.00%

Min Application
Temp
Min Service
Temp
Max Short-Term
Temp
Max Long-Term
Temp
65 °F -22 °F 266 °F  
Adhesive Tape Features
  • Silicone adhesive is modified
  • Excellent conformability
  • Superior adhesion to substrate
  • Removes cleanly after processing
Adhesive Tape Applications
  • Masking of circuit boards during solder stripping and nickel/gold plating of contact finger
  • Protects large areas of circuit boards from chemical fumes or splashes
  • Recommended for applications where superior adhesion is required
Adhesive Tape Markets Served
Adhesive Tape Colors
  • Blue

Comparable products
Backing Adhesive Thickness Adhesion
 PET - Polyester   Silicone   2.00mil   20.00oz/in 

Edit

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Backing Adhesive Thickness Adhesion
 PET - Polyester   Rubber   2.20mil   19.00oz/in 

Edit

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Backing Adhesive Thickness Adhesion
 PET - Polyester   Silicone   2.50mil   30.00oz/in 

Edit

Pricing Popup Link: javascript:showProductDialog(3821, true);

Recommended Rank: 80

Backing Adhesive Thickness Adhesion
 PET - Polyester   Silicone   2.25mil   30.00oz/in 

Edit

Pricing Popup Link: <Not Available>

Recommended Rank: 50

Converting Options
Converting Services
Budnick Converting offers a number of services to take the product you need and make it perfect for your application.  With converting methods ranging from precision slitting or die-cutting to printing and coating, Budnick has the capabilities to create anything you can dream up. 
Services
Precision Cutting

Die-Cutting

Slitting

Printing

Adhesive Coating

Finishing and Spooling

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.