V998, Double Coated Closed Cell Polyvinyl Chloride, Saint-Gobain, adhesive tape datasheet

Home >

Saint-Gobain V998
Double Coated Closed Cell Polyvinyl Chloride

General Information

V998 is a 1/4" thick, closed cell Polyvinyl Chloride with acrylic on both sides. It is excellent for glazing of joints with high movement such as marine glass. V998 is a good choice to seal out water, dust and light, even in joints with a high degree of movement. Due to its excellent resistance to weathering, oxidation and ultraviolet exposure, produces long-life seal. Norseal® V990 series.

Backing	Adhesive (unwind)	Thickness (total)	Liner Type (outer)
PVC - Polyvinylchloride	Acrylic	250.00 mil	Polyethylene (blue)

Adhesion to Steel 180° Peel	adhesion to steel 180° peel - liner side	Tensile Strength	Elongation Percent
			180.00%

Min Application Temp	Min Service Temp	Max Short-Term Temp	Max Long-Term Temp
45 °F	-30 °F	180 °F

Adhesive Tape Features

Exceeds requirements of AAMA 810.1 specification
Compatible with most glazing components
Excellent die cutting due to high shore hardness
Peel Adhesion=9.5#/in
Density=15#/cu.ft.
Water Penetration=1%
Pump test=Pass
Tensile Adhesion=9.5#/in.
When properly sized, seals effectively without shimming
Provides uniform sight lines without hand tooling, oozing or cold flow of sealant

Adhesive Tape Applications

Exterior glazing sealant for metal, wood and vinyl sash systems
Heating and ventilation duct systems
Commercial refrigeration glazing
Vibration dampening
Marine glazing
Low stress mounting
Die cut gaskets

Adhesive Tape Markets Served

Adhesive Tape Colors

Black

Comparable products

Saint-Gobain V998

Double Coated Closed Cell Polyvinyl Chloride

Backing	Adhesive	Thickness	Adhesion
PVC - Polyvinylchloride	Acrylic	250.00mil	oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Converting Options

Converting Services

Budnick Converting offers a number of services to take the product you need and make it perfect for your application. With converting methods ranging from precision slitting or die-cutting to printing and coating, Budnick has the capabilities to create anything you can dream up.

Services

Precision Cutting

Die-Cutting

Slitting

Printing

Adhesive Coating

Finishing and Spooling

Next Steps

Learn More About Budnick

Contact Us

View Case Studies

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.