V8216, Single Coated, Closed Cell PVC, Saint-Gobain, adhesive tape datasheet

Home >

Saint-Gobain V8216
Single Coated, Closed Cell PVC

General Information

V8216 is a 1/2" thick , closed cell Polyvinylcloride (PVC), with an acrylic adhesive system on one side. Primarily used for light, air, and moisture seals in a variety of applications. Norseal® V820 series.

Backing	Adhesive (unwind)	Thickness (total)	Liner Type (outer)
PVC - Polyvinylchloride	Acrylic	500.00 mil	Paper

Adhesion to Steel 180° Peel	Adhesive Activation	Tensile Strength	Elongation Percent
	Pressure		125.00%

Min Application Temp	Min Service Temp	Max Short-Term Temp	Max Long-Term Temp
40 °F	-15 °F	180 °F	180 °F

Adhesive Tape Features

Available in black
Paper liner
Flexible backing
Dimensionally stable
Tensile Strength : 13.7 PSI
Density : 6lbs./cu. ft.
Thermal Conductivity= .27
Excellent for all climates; withstands wide temperature range
Excellent conformability and adapts to irregular surfaces
Low deflection force causes no distortion of thin gauge plastics and metals
Aggressive adhesive allow for easy installation
Dimensionable stable under compression. Will not ooze, drip or shift

Adhesive Tape Applications

Light and dust seals
Suspended ceilings
Refrigeration
Wall systems
Industrial/Electronic equipment cabinets
Toolbox lid seal
Curtainwall
Precast concrete wall
Refrigeration
Telecommunications
Pneumatic system seals
Retail weatherstrip
Bus & off-road vehicles
Air conditioning
Environmentally controlled rooms
Squeak and rattle prevention

Adhesive Tape Markets Served

Adhesive Tape Colors

Black

Comparable products

Saint-Gobain V8216

Single Coated, Closed Cell PVC

Backing	Adhesive	Thickness	Adhesion
PVC - Polyvinylchloride	Acrylic	500.00mil	oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Converting Options

Converting Services

Budnick Converting offers a number of services to take the product you need and make it perfect for your application. With converting methods ranging from precision slitting or die-cutting to printing and coating, Budnick has the capabilities to create anything you can dream up.

Services

Precision Cutting

Die-Cutting

Slitting

Printing

Adhesive Coating

Finishing and Spooling

Next Steps

Learn More About Budnick

Contact Us

View Case Studies

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.