V738, Single Coated, Closed Cell PVC, Saint-Gobain, adhesive tape datasheet

Home >

Saint-Gobain V738
Single Coated, Closed Cell PVC

General Information

V738 is a 1/4" thick, closed cell Polyvinyl Chloride (PVC), with an acrylic adhesive on one side. This is a multipurpose foam that's primarily used for light, dust, and moisture seals. Norseal® V730 series.

Backing	Adhesive (unwind)	Thickness (total)	Liner Type (outer)
PVC - Polyvinylchloride	Acrylic	250.00 mil	Paper

Adhesion to Steel 180° Peel	Adhesive Activation	Tensile Strength	Elongation Percent
	Pressure		140.00%

Min Application Temp	Min Service Temp	Max Short-Term Temp	Max Long-Term Temp
40 °F	-15 °F	160 °F	160 °F

Adhesive Tape Features

Available in gray
Paper liner
Rolls are dimensionally stable, will not ooze, drip or run under compression
Tensile strength=15PSI
Density=6#/cu. ft.
Easy to radius, enhancing positive seal on curved surfaces
Low thermal conductivity improves the energy efficiency of your structure
Controls sound transmission & vibration. Ideal for acoustical partitions
Low deflection force reduces distortion of adjacent material
High tack positioning adhesive grips tight on initial contact, keeps foam in place during assembly

Adhesive Tape Applications

Acoustical partitions
Suspended ceilings
Cold rooms
Vending machines
Culvert pipes
Hot tubs
Seals for flashing
Saunas
Battery cushion
Computer cabinet dust & noise seal
Roof top air conditioner insulation
Dust seal on analytic equipment

Adhesive Tape Markets Served

Adhesive Tape Colors

Gray

Comparable products

Saint-Gobain V738

Single Coated, Closed Cell PVC

Backing	Adhesive	Thickness	Adhesion
PVC - Polyvinylchloride	Acrylic	250.00mil	oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Converting Options

Converting Services

Budnick Converting offers a number of services to take the product you need and make it perfect for your application. With converting methods ranging from precision slitting or die-cutting to printing and coating, Budnick has the capabilities to create anything you can dream up.

Services

Precision Cutting

Die-Cutting

Slitting

Printing

Adhesive Coating

Finishing and Spooling

Next Steps

Learn More About Budnick

Contact Us

View Case Studies

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.