V7112, Density, Force to Compress, Compression Deflection, Saint-Gobain, adhesive tape datasheet

Home >

Saint-Gobain V7112
Density, Force to Compress, Compression Deflection

General Information

V7112 is a 12/32" thick, single coated, closed cell polyvinyl chloride foam that has a "swirl free" feature that won't move or twist when penetrated by fasteners. Norseal® V710 series.

Backing	Adhesive (unwind)	Thickness (total)	Liner Type (outer)
PVC - Polyvinylchloride	Acrylic	375.00 mil	Paper

Adhesion to Steel 180° Peel	Adhesive Activation	Tensile Strength	Elongation Percent
	Pressure		80.00%

Min Application Temp	Min Service Temp	Max Short-Term Temp	Max Long-Term Temp
40 °F	-15 °F	160 °F

Adhesive Tape Features

Special foam substrate resists distortion from drilling, riveting and other fastening operations
Requires only 30% compression to seal against light, dust and water
Density= 12#/cu.ft.
Tensile=35PSI
Thermal Conductivity=.3
Delivers weather-resistant, long life sealing performance
Conforms to curved or irregular surfaces
Compression characteristics make it highly effective for sealing overlap joints
Material is dimensionally stable. Will not ooze, drip, or slip while under compression
Aggresive adhesive holds sealant in place during assembly operations
Liner on the non-adhesive side makes handling easy

Adhesive Tape Applications

Modular walls
Corrugated panel and lap joint seal
Cab roof line seal
Die cut gaskets
Vehicle overlap seals
Metal farm building
Outdoor lighting fixtures
Railroad car/Marine use

Adhesive Tape Markets Served

Adhesive Tape Colors

Black
Gray

Comparable products

Saint-Gobain V7112

Density, Force to Compress, Compression Deflection

Backing	Adhesive	Thickness	Adhesion
PVC - Polyvinylchloride	Acrylic	375.00mil	oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Converting Options

Converting Services

Budnick Converting offers a number of services to take the product you need and make it perfect for your application. With converting methods ranging from precision slitting or die-cutting to printing and coating, Budnick has the capabilities to create anything you can dream up.

Services

Precision Cutting

Die-Cutting

Slitting

Printing

Adhesive Coating

Finishing and Spooling

Next Steps

Learn More About Budnick

Contact Us

View Case Studies

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.