V2212, Double Coated Open Cell Polyurethane Foam, Saint-Gobain, adhesive tape datasheet

Home >

Saint-Gobain V2212
Double Coated Open Cell Polyurethane Foam

General Information

V2212 is a .375" thick, open cell polyurethane foam. It is a structural glazing and cladding spacer system for shop fabrication. Thermalbond® V2200 series.

Backing	Adhesive (unwind)	Thickness (total)	Liner Type (outer)
PU - Polyurethane	Acrylic	375.00 mil	Paper

Adhesion to Steel 180° Peel	adhesion to steel 180° peel - liner side	Tensile Strength	Elongation Percent
			105.00%

Min Application Temp	Min Service Temp	Max Short-Term Temp	Max Long-Term Temp
60 °F	-40 °F	180 °F

Adhesive Tape Features

Density=22#/cu.ft.
Tensile Strength=130PSI
Dynamic Tensile Adhesion=45PSI
Dynamic Shear Adhesion=30PSI
Static Shear Adhesion (1 PSI load)= 2000+hours
Thermal Conductivity=.55
Ultraviolet Resistance: 3000hrs. of exposure
Migratory staining of Acrylic enamel: No staining after 200 hours of ultraviolet at 140°F
Open cell structure allows air and moisture to reach the silicone permitting optimum curing
High strength polyurethane foam substrate is chemically compatible with all silicones tested
Low thermal conductivity foam substrate reduces heat transfer and inhibits condensation on windows, doors and metal systems
Excellent resistance to weather, fungi and oxidation
Superb spacer for two and four-sided structural silicone glazing systems
Speeds shop fabrication of unitized panels
Easy to handle
Suitable for die cutting

Adhesive Tape Applications

Structural silicone glazing
Thermal break on storm window and doors
Curtain wall
Die cut for vibration dampening

Adhesive Tape Markets Served

Adhesive Tape Colors

Black

Comparable products

Saint-Gobain V2212

Double Coated Open Cell Polyurethane Foam

Backing	Adhesive	Thickness	Adhesion
PU - Polyurethane	Acrylic	375.00mil	oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Converting Options

Converting Services

Budnick Converting offers a number of services to take the product you need and make it perfect for your application. With converting methods ranging from precision slitting or die-cutting to printing and coating, Budnick has the capabilities to create anything you can dream up.

Services

Precision Cutting

Die-Cutting

Slitting

Printing

Adhesive Coating

Finishing and Spooling

Next Steps

Learn More About Budnick

Contact Us

View Case Studies

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.