Call 800-282-0090


Home > Data Sheet
V2030
Double Coated, Closed Cell Polyurethane Foam



General Information
V2030 is a 30 mil thick, double coated polyurethane foam. Its high density creates a durable, all-weather foam mounting tape for skylights, HVAC gasketing & glass lamination. The Normount foam substrate absorbs vibrations and distributes stress forces over the entire bond line. The closed cell structure also allows the it to used as a gasket in application in severe environments. The high strength adhesive increases its overall capabilities. Normount® V2000 series.
Backing Adhesive
(unwind)
Thickness
(total)
Liner Type
(outer)
PU - Polyurethane Acrylic 30.00 mil Polyethylene (powder blue)
Adhesion to Steel
180° Peel
adhesion to steel 180° peel - liner side Tensile Strength Elongation Percent
100.00 oz/in 100.00 oz/in   240.00%
Min Application
Temp
Min Service
Temp
Max Short-Term
Temp
Max Long-Term
Temp
60 °F -30 °F 200 °F  
Adhesive Tape Features
  • Density=31#/cu.ft.
  • Excellent for die-cutting
  • Superior aging properties
  • Complete compatibility with polycarbonates, acrylic plastics and most silicones
  • Environmental resistance against weathering, fungi & oxidation, UV light & extreme temperatures
  • High performance adhesive double coated on a polyurethane foam
  • High shear and tensile strength
Adhesive Tape Applications
  • Vibration dampeners
  • Appliance handles
  • Circuit board mounts
  • Mirror mounting
  • Glass lamination
  • Letters and signs
  • Emblems & nameplates
  • Skylights
  • Trim & ornamentation
  • Sound baffles
  • Kick panels
  • Signs
  • Weatherstripping
Adhesive Tape Markets Served
  • Appliance
  • Construction
  • Glass Manufacturing
  • Electronics/Electrical
  • Point of Purchase
Adhesive Tape Colors
  • Black
Comparable products
Backing Adhesive Thickness Adhesion
 PU - Polyurethane   Acrylic   30.00mil   100.00oz/in 

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.


Choose the surface energy of the exact surface that the adhesive will contact (e.g. if the part was painted metal, paint would be the surface energy).