Converting Ideas into Solutions ®

Saint-Gobain
SG25-03R

Primary PTFE Coated Glass Tape

Saint-Gobain Performance Plastics CHR brand pressure sensitive adhesive tapes constructed of fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provide superior non-stick surfaces, allowing your equipment to work smoothly and more efficiently. The Saint-Gobain Series has been designed to meet tough requirements demanded by the packaging industry: high speed durability, long life at high temperatures.

Backing/Carrier PTFE Coated Fiberglass
Adhesive Silicone
Thickness 5.3 Mils
Tensile 90.00 lbs/in
Elongation 5.00%
Adhesive Activation Pressure
Adhesion (unwind) 50 oz/in
Min. Application Temp 20° F
Min. Service Temp -100° F
Max Short-Term Temp 500° F
Max Long-Term Temp 500° F

Product Features

  • Durable fiberglass fabric impregnated with pure PTFE
  • Super stick silicone adhesive
  • Performs in continuous temperatures up to 500 degrees
  • Elongation less than 5%
  • Economical for a variety of heat sealing needs
  • Dimensionally stable material resistant to tears, punctures, abrasion, and wear

Markets Served

  • Aerospace
  • Industrial
  • Plastic bag manufacturing

Adhesive Tape Applications

  • Heat sealing applications
  • Form-fill-seal equipment
  • Non-stick surface applications in aircraft industry
  • Release surface on heat sealers
  • Blister formation
  • Lining of guide rails, chutes and slides

Adhesive Tape Colors

  • Natural

Data provided by Budnick Converting, Inc.

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.

Request More Information

For decades Budnick has provided customized solutions for specialty adhesive applications designed specifically for manufacturers. Whether you're looking to speed up production, improve product performance, or protect your products during transport, Budnick has a solution for your needs!