K2A00, Single Coated Extruded Polyvinyl Chloride Foam, Saint-Gobain, adhesive tape datasheet

Home >

Saint-Gobain K2A00
Single Coated Extruded Polyvinyl Chloride Foam

General Information

K2A00 is an extruded PVC that come in thickness' ranging from 3/16" to 1/2" used primarily as appliance seals especially refrigerators and in metal building and pre-fabricated constructions. Its profile is round and long roll lengths depend on profile diameter.

Backing	Adhesive (unwind)	Thickness (total)	Liner Type (outer)
PVC - Polyvinylchloride	Acrylic	187.50 mil	Polyethylene

Adhesion to Steel 180° Peel	Adhesive Activation	Tensile Strength	Elongation Percent
	Pressure		80.00%

Min Application Temp	Min Service Temp	Max Short-Term Temp	Max Long-Term Temp
40 °F	-15 °F	160 °F

Adhesive Tape Features

Custom roll lengths differ according to diameter:
3/16"-4000'
1/4"-2000'
5/16"-500'
3/8"-800'
1/2"-500'
Custom density
Custom adhesive: High tack acrylic or Pressure sensitive Butyl
Custom Liners: Paper or polyethylene
Custom length spools
Density=7#/cu.ft.
Tensile Strength=80PSI
30% Compression=2.2PSI
30% deflection=.9
Available without adhesive
Extrusions have a 'skin' substantially eliminating open surface cells
Long spooled lengths are economically for long production runs
Superb closed cell structure of foam requires less material to achieve positive seal
Resistant to weather, oxidation, funge and remains flexible at low temperatures
Provides an excellent seal against light, dust & water
Norex will not displace, drip or ooxe, reducing messy clean-up costs

Adhesive Tape Applications

Appliance seals
Metal building
Pre-fabricated constructions
Welt cord
Log homes
Transportation
Commercial refrigeration

Adhesive Tape Markets Served

Adhesive Tape Colors

Black
Gray
White

Comparable products

Saint-Gobain K2A00

Single Coated Extruded Polyvinyl Chloride Foam

Backing	Adhesive	Thickness	Adhesion
PVC - Polyvinylchloride	Acrylic	187.50mil	oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Converting Options

Converting Services

Budnick Converting offers a number of services to take the product you need and make it perfect for your application. With converting methods ranging from precision slitting or die-cutting to printing and coating, Budnick has the capabilities to create anything you can dream up.

Services

Precision Cutting

Die-Cutting

Slitting

Printing

Adhesive Coating

Finishing and Spooling

Next Steps

Learn More About Budnick

Contact Us

View Case Studies

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.