Saint-Gobain
2255-3
High Modulous PTFE Film
2255-3 is 4.5 mil, high modulous, PTFE coated film tape. It is primarily used for phase insulation, bundling end turns, anchoring breakouts and protecting air-frame wire harnesses. The excellent dielectric properties of this product combined with its high temperature adhesive coating make 2255-3 an excellent choice as a high temperature insulation product. 2255-3 has low friction, anti-stick, low elongation and non-toxic properties.
| Backing/Carrier | PTFE - Hi Modulous |
|---|---|
| Adhesive | Silicone |
| Thickness | 4.5 Mils |
| Tensile | 35.00 lbs/in |
|---|---|
| Elongation | 160.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 35 oz/in |
| Min. Application Temp | 20° F |
|---|---|
| Min. Service Temp | -100° F |
| Max Short-Term Temp | 500° F |
| Max Long-Term Temp | 500° F |
Product Features
- High modulous
- High temperature insulation
- Low elongation
- High degree of chemical inertness
- Anti-stick
- Non-toxic
- Low friction
- Meets MIL-I-23594 type 1, class 2
- Extremely durable insulation tape
- Suitable for wide temperature ranges
- Excellent dielectric properties
- High tensile strength
Adhesive Tape Applications
- Phase insulation
- Bundling end turns
- Spot bundling
- Anchoring breakouts
- Protecting air-frame wire harnesses
- Roller wrap
- High temperature squeak and rattle prevention
Adhesive Tape Colors
- Gray
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.