225FR, Polyethylene Coated, Polyken*, adhesive tape datasheet

Home >

Polyken* 225FR
Polyethylene Coated

General Information

225FR is a 12 mil cloth tape used for seam sealing(taping) and repair of cargo compartment liners for use on covering pins/rivets where high adhesion and flame resistance is critical.

Backing	Adhesive (unwind)	Thickness (total)	Liner Type (outer)
Polyethylene Coated Cloth	Rubber	12.00 mil

Adhesion to Steel 180° Peel	Adhesive Activation	Tensile Strength	Elongation Percent
66.00 oz/in	Pressure	26.00 lbs/in	5.00%

Min Application Temp	Min Service Temp	Max Short-Term Temp	Max Long-Term Temp
40 °F	0 °F	180 °F

Adhesive Tape Features

Complies with FAA specification F.A.R. 25.853(a)
Ease of installation
High conformability accommodates angles and turns
High adhesion wards off lifting and curling
Maintains its seal and resists creeping
Flexibility allows for ease of realignment
Adhesion to backing/Carrier: 41 oz./in.- PSTC-1
Tack Level: 2.5 in.- PSTC-6
Weight: 10.5 oz./sq. yd.- ASTM D-1000

Adhesive Tape Applications

Cargo pit applications
Seam sealing (taping) and repair of cargo compartment liners for use on covering pins/rivets where high adhesion and flame resistance is critial

Adhesive Tape Markets Served

Adhesive Tape Colors

Silver
White

Comparable products

Polyken* 225FR

Polyethylene Coated

Backing	Adhesive	Thickness	Adhesion
Polyethylene Coated Cloth	Rubber	12.00mil	66.00oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 10

Shurtape Technologies Inc PC21F

Cloth/Duct Tape

Backing	Adhesive	Thickness	Adhesion
Polyethylene Coated Cloth	Rubber	14.00mil	35.00oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Converting Options

Converting Services

Budnick Converting offers a number of services to take the product you need and make it perfect for your application. With converting methods ranging from precision slitting or die-cutting to printing and coating, Budnick has the capabilities to create anything you can dream up.

Services

Precision Cutting

Die-Cutting

Slitting

Printing

Adhesive Coating

Finishing and Spooling

Next Steps

Learn More About Budnick

Contact Us

View Case Studies

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.