SOLDERMASK, Solder-Mask Circuit Board Masking Tape, Permacel/Nitto Denko America, adhesive tape datasheet

Home >

Permacel/Nitto Denko America SOLDERMASK
Solder-Mask Circuit Board Masking Tape

General Information

Solder-Mask is an 8.2 mil, impregnated crepe paper, circuit board masking tape. It is designed for masking printed circuit board contact fingers and assembly holes prior to wave soldering. Solder-Mask is an excellent choice for all wave soldering operations.

Backing	Adhesive (unwind)	Thickness (total)	Liner Type (outer)
Crepe Paper	Silicone	8.20 mil

Adhesion to Steel 180° Peel	Adhesive Activation	Tensile Strength	Elongation Percent
45.00 oz/in	Pressure	20.00 lbs/in	8.00%

Min Application Temp	Min Service Temp	Max Short-Term Temp	Max Long-Term Temp
40 °F	0 °F

Adhesive Tape Features

Stays firmly anchored to the circuit board thru the flux, pre-heat and solder stations
Easily removed in one piece without leaving any residue
Backing conforms precisely to the printed circuit design, protecting/masking gold fingers at solder temperatures
Easily applied by hand or machine
Unwind @ 150 FPM = 30 oz./in.

Adhesive Tape Applications

Masking printed circuit board gold fingers during the wave soldering operation
Can be interlined & die-cut and applied to a circuit board wherever a spot sold mask is required

Adhesive Tape Markets Served

Adhesive Tape Colors

Comparable products

Permacel/Nitto Denko America SOLDERMASK

Solder-Mask Circuit Board Masking Tape

Backing	Adhesive	Thickness	Adhesion
Crepe Paper	Silicone	8.20mil	45.00oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Converting Options

Converting Services

Budnick Converting offers a number of services to take the product you need and make it perfect for your application. With converting methods ranging from precision slitting or die-cutting to printing and coating, Budnick has the capabilities to create anything you can dream up.

Services

Precision Cutting

Die-Cutting

Slitting

Printing

Adhesive Coating

Finishing and Spooling

Next Steps

Learn More About Budnick

Contact Us

View Case Studies

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.