SAFETY STR, Safety Stripes®, Permacel/Nitto Denko America, adhesive tape datasheet

Home >

Permacel/Nitto Denko America SAFETY STR
Safety Stripes®

General Information

**Safety Stripe® is an obsolete item** It is a 6 mil, PVC safety marking tape. It is expressly designed for safety marking in industrial plants, commercial buildings, institutions & recreational facilities. Safety Stripe® is available in 2" stripes of black-and-yellow. This tape fulfills all O.S.H.A requirements.

Backing	Adhesive (unwind)	Thickness (total)	Liner Type (outer)
PVC - Polyvinylchloride	Rubber	6.00 mil

Adhesion to Steel 180° Peel	Adhesive Activation	Tensile Strength	Elongation Percent
30.00 oz/in	Pressure	18.00 lbs/in

Min Application Temp	Min Service Temp	Max Short-Term Temp	Max Long-Term Temp
40 °F	0 °F

Adhesive Tape Features

Printed PVC is protected by a clear laminate
Unwind @150 ft/min=65oz
Requires minimal surface preparation
Color holds up under the toughest conditions
Meets O.S.H.A. requirements
Provides super abrasion resistance
Holds up longer than paint & no down time is required after installation
Resists oil, dirt & chemicals
Aggresive adhesive system holds on most surfaces

Adhesive Tape Applications

Safety marking applications in industrial plants, commericial buildings, institutions and recreational facilities
Marks obstructions, low hanging objects, pillars, handrails, passageways, aisles and any potentially hazardous areas or objects

Adhesive Tape Markets Served

Adhesive Tape Colors

Comparable products

Permacel/Nitto Denko America SAFETY STR

Safety Stripes®

Backing	Adhesive	Thickness	Adhesion
PVC - Polyvinylchloride	Rubber	6.00mil	30.00oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Converting Options

Converting Services

Budnick Converting offers a number of services to take the product you need and make it perfect for your application. With converting methods ranging from precision slitting or die-cutting to printing and coating, Budnick has the capabilities to create anything you can dream up.

Services

Precision Cutting

Die-Cutting

Slitting

Printing

Adhesive Coating

Finishing and Spooling

Next Steps

Learn More About Budnick

Contact Us

View Case Studies

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.