P30-105, 10 Mil Vinyl Electrical Tape, Permacel/Nitto Denko America, adhesive tape datasheet

Home >

Permacel/Nitto Denko America P30-105
10 Mil Vinyl Electrical Tape

General Information

P30-105 is a 10 mil, heavy-duty, vinyl electrical tape. It is primarily used for insulating bus bar connections, bends and breakouts. This tape can also be used for insulating cable connections, bundling lead wires and protecting wire & hose harnesses.

Backing	Adhesive (unwind)	Thickness (total)	Liner Type (outer)
PVC - Polyvinylchloride	Rubber	10.00 mil

Adhesion to Steel 180° Peel	Adhesive Activation	Tensile Strength	Elongation Percent
30.00 oz/in	Pressure	30.00 lbs/in	190.00%

Min Application Temp	Min Service Temp	Max Short-Term Temp	Max Long-Term Temp
40 °F	0 °F

Adhesive Tape Features

Extremely high dielectric strength
Excellent conformability
Outstanding tear & abrasion resistance
Flame retardant
Maximum dielectric barrier with minimum wraps
Water tight seal on irregular surfaces
Its excellent adhesion to plastic materials makes it perfect for use with wiring systems

Adhesive Tape Applications

Insulating bus bar connections, bends & breakouts
Insulates cable connectios & turnouts
Bundling lead wires & cables
A protective armor wrap in the manufacturing of wire & hose harnessing
Insulating wrap for small bobbin & stick wound coils that aren't varnished or encapsulated

Adhesive Tape Markets Served

Adhesive Tape Colors

Black

Comparable products

Permacel/Nitto Denko America P30-105

10 Mil Vinyl Electrical Tape

Backing	Adhesive	Thickness	Adhesion
PVC - Polyvinylchloride	Rubber	10.00mil	30.00oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Converting Options

Converting Services

Budnick Converting offers a number of services to take the product you need and make it perfect for your application. With converting methods ranging from precision slitting or die-cutting to printing and coating, Budnick has the capabilities to create anything you can dream up.

Services

Precision Cutting

Die-Cutting

Slitting

Printing

Adhesive Coating

Finishing and Spooling

Next Steps

Learn More About Budnick

Contact Us

View Case Studies

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.