P248, Polyester Film/Paper Combo Electrical Insulating, Permacel/Nitto Denko America, adhesive tape datasheet

Home >

Permacel/Nitto Denko America P248
Polyester Film/Paper Combo Electrical Insulating

General Information

***DISCONTINUED BY PERMACEL*** Please use Compare-A-Tape to locate a substitute. P248 is a 6 mil, polyester film/ paper combination, electrical insulating tape. It is widely used as an economical general-purpose tape. P248 is especially effective with automated application equipment.

Backing	Adhesive (unwind)	Thickness (total)	Liner Type (outer)
Film and Paper Laminate	Rubber	6.00 mil

Adhesion to Steel 180° Peel	Adhesive Activation	Tensile Strength	Elongation Percent
50.00 oz/in	Pressure	40.00 lbs/in	5.00%

Min Application Temp	Min Service Temp	Max Short-Term Temp	Max Long-Term Temp
40 °F	0 °F	302 °F

Adhesive Tape Features

Backing material = 1-mil polyester fim, laminated & 2-mil hemp paper
Used for difficult holding applications
Can be used over burrs & sharp edges with minimum loss of dielectric strength
Uniform easy unwind
Abrasion resistant
Unwind @ 150 FPM = 7 oz./in.
Rec. bake cycle = 2 hrs. @ 275° F. or 1 hr. @ 302° F.

Adhesive Tape Applications

Automated machine applications
High volume coil applications
Tabbing/holding winding finish turn
Insulating outer protective wrap
Bundling leads
Ground & barrier insulation
Anchoring terminal board

Adhesive Tape Markets Served

Adhesive Tape Colors

Black
Tan

Comparable products

Permacel/Nitto Denko America P248

Polyester Film/Paper Combo Electrical Insulating

Backing	Adhesive	Thickness	Adhesion
Film and Paper Laminate	Rubber	6.00mil	50.00oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 3

3M 44

Polyester Web-Reinforced Film

Backing	Adhesive	Thickness	Adhesion
PET - Polyester	Rubber	5.50mil	65.00oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Converting Options

Converting Services

Budnick Converting offers a number of services to take the product you need and make it perfect for your application. With converting methods ranging from precision slitting or die-cutting to printing and coating, Budnick has the capabilities to create anything you can dream up.

Services

Precision Cutting

Die-Cutting

Slitting

Printing

Adhesive Coating

Finishing and Spooling

Next Steps

Learn More About Budnick

Contact Us

View Case Studies

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.