P21SP, Glass Cloth Electrical Insulating Tape, Permacel/Nitto Denko America, adhesive tape datasheet

Home >

Permacel/Nitto Denko America P21SP
Glass Cloth Electrical Insulating Tape

General Information

***DISCONTINUED BY PERMACEL*** Please use Compare-A-Tape to locate a substitute. P21SP is a new "softer cloth" version of P21 for better conformability. A 7 mil glass cloth for insulating and holding applications involving heavy gauge wire and/or high temperatures. Engineered for a wide range of general industry electrical maintenance applications Also used for splicing and harness wrapping and for protective wrapping of cables and wires. Proerly cured, this product becomes more firmly bonded to the surface to which it is applied. It retains sufficient suppleness to withstand flexing without cracking-becomes firm, but not brittle.

Backing	Adhesive (unwind)	Thickness (total)	Liner Type (outer)
Fiberglass	Rubber	7.00 mil

Adhesion to Steel 180° Peel	Adhesive Activation	Tensile Strength	Elongation Percent
40.00 oz/in	Pressure	190.00 lbs/in

Min Application Temp	Min Service Temp	Max Short-Term Temp	Max Long-Term Temp
40 °F	0 °F

Adhesive Tape Features

Extremely conformable
Features true "2 to 1" characteristics: In uncured state, it has excellent pressure sensitive properties
Can be subjected to cure through heat, which firms the adhesive and gives the tape solvent resistance
Electrical adhesive is non-corrosive against copper and contains no sulfur or other injurious agents
Offers outstanding abrasion resistance
Supplied in slit sizes witha pinked edge to eliminate fraying

Adhesive Tape Applications

Engineered for a wide range of general industry electrical maintenance applications
Used for splicing, harness wrapping & for protective wrapping of cables and wires

Adhesive Tape Markets Served

Adhesive Tape Colors

Comparable products

Permacel/Nitto Denko America P21SP

Glass Cloth Electrical Insulating Tape

Backing	Adhesive	Thickness	Adhesion
Fiberglass	Rubber	7.00mil	40.00oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 3

Converting Options

Converting Services

Budnick Converting offers a number of services to take the product you need and make it perfect for your application. With converting methods ranging from precision slitting or die-cutting to printing and coating, Budnick has the capabilities to create anything you can dream up.

Services

Precision Cutting

Die-Cutting

Slitting

Printing

Adhesive Coating

Finishing and Spooling

Next Steps

Learn More About Budnick

Contact Us

View Case Studies

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.