EE1010, Closed Cell EPDM Foam, Permacel/Nitto Denko America, adhesive tape datasheet

Home >

Permacel/Nitto Denko America EE1010
Closed Cell EPDM Foam

General Information

EE1010 (EPT Sealer) is a pressure-closed-cell foam joint-filling material used to fill gaps found in a variety of structures i.e. buildings, civil engineering works, rolling stock, housing facilities and all types of equipment. It is manufactured by expanding a mixture of synthetic rubber and EPDM (ethylene propylene diene methylene). According to the degree of compression applied to the foam, EE-1010 can be used as a waterproofing, windbreak, dust-proofing, sound damping or thermal insulating material. Building and civil engineering works: For sealing joints of exterior panels such as PC plates, ALC plates or slate plates. For sealing joints around sashes and of steel water grooves, and at road or bridge construction sites. Electrical appliances: For packing and sealing refrigerators, washers, air conditioners, etc. Housing and equipment : For packing and sealing. Marine vessels, rolling stock, autos: Used for sealing weathership retainers and for filling and sealing all types of joints.

Backing	Adhesive (unwind)	Thickness (total)	Liner Type (outer)
EPDM - Ethylene Propylene Diene Monomer

Adhesion to Steel 180° Peel	Adhesive Activation	Tensile Strength	Elongation Percent
52.80 oz/in	Pressure	13.00 lbs/in	430.00%

Min Application Temp	Min Service Temp	Max Short-Term Temp	Max Long-Term Temp
40 °F	0 °F	212 °F

Adhesive Tape Features

Conforms well to gaps with rough surfaces as well as to expansion and contraction caused by temperature change
When heated or compressed, the foam will not permit any component to be squeezed out
Lightweight (specific gravity is 0.095), and the foamed admixtures do not weld each other
Compression load at 25%=5oz/sq in; at 50%=11 oz/sq in
Available with polypropylene liner as EE1010PL
Offers excellent weatherability (ten years equivalent test), high resistance to low and high temperatures
High chemical resistance (acids and alkalis)
Resists low compression stress - will never deform a structure after application
Easy to compress
Excellent water tightness can be obtained
Easy to store and apply

Adhesive Tape Applications

Can be used as a waterproofing, windbreak, dust-proofing, sound damping or thermal insulating material
Building and civil engineering works: For sealing joints of exterior panels such as PC plates, ALC plates or slate plates
For sealing joints around sashes and of steel water grooves, and at road or bridge construction sites
Electrical appliances: For packing and sealing refrigerators, washers, air conditioners, etc.
Housing and equipment : For packing and sealing
Marine vessels, rolling stock, autos: Used for sealing weathership retainers and for filling and sealing all types of joints

Adhesive Tape Markets Served

Adhesive Tape Colors

Comparable products

Permacel/Nitto Denko America EE1010

Closed Cell EPDM Foam

Backing	Adhesive	Thickness	Adhesion
EPDM - Ethylene Propylene Diene Monomer		mil	52.80oz/in

Converting Options

Converting Services

Budnick Converting offers a number of services to take the product you need and make it perfect for your application. With converting methods ranging from precision slitting or die-cutting to printing and coating, Budnick has the capabilities to create anything you can dream up.