587B, Stickyback Flexofoam Mounting Tape, Permacel/Nitto Denko America, adhesive tape datasheet

Home >

Permacel/Nitto Denko America 587B
Stickyback Flexofoam Mounting Tape

General Information

587B is a 20 mil, PVC foam, flexographic printing plate mount. It is a dependable mount for both rubber & photopolymer printing plates. 587B provides quick repositioning and residue free removal once the print run is complete.

Backing	Adhesive (unwind)	Thickness (total)	Liner Type (outer)
PVC - Polyvinylchloride	Rubber	20.00 mil

Adhesion to Steel 180° Peel	adhesion to steel 180° peel - liner side	Tensile Strength	Elongation Percent
50.00 oz/in	50.00 oz/in

Min Application Temp	Min Service Temp	Max Short-Term Temp	Max Long-Term Temp

Adhesive Tape Features

Adhesion to rubber = 33 oz/in on both sides
Suitable for rubber or photopolymer printing plates
Repositionable
Residue free removal
Specially formulated adhesive assures firm bond between cylinder & printing plates
High cohesive-strength adhesive & firm anchorage to tape's foam carrier allows easy repositioning of plates & clean removal
Consistent thickness makes certain that the plate is at the correct distance from the printing surface throughout the entire print run

Adhesive Tape Applications

Rubber printing plate mounting
Photopolymer printing plate mounting

Adhesive Tape Markets Served

Adhesive Tape Colors

White

Comparable products

Permacel/Nitto Denko America 587B

Stickyback Flexofoam Mounting Tape

Backing	Adhesive	Thickness	Adhesion
PVC - Polyvinylchloride	Rubber	20.00mil	50.00oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Converting Options

Converting Services

Budnick Converting offers a number of services to take the product you need and make it perfect for your application. With converting methods ranging from precision slitting or die-cutting to printing and coating, Budnick has the capabilities to create anything you can dream up.

Services

Precision Cutting

Die-Cutting

Slitting

Printing

Adhesive Coating

Finishing and Spooling

Next Steps

Learn More About Budnick

Contact Us

View Case Studies

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.