Call 800-282-0090


224SPV
Surface Protection Vinyl Tape



General Information
224 is a 3 mil PVC surface protection tape for stainless steel and coated optical glass. This film acts as a lubricant during deep drawing processes, is suitable for outdoor use and resists UV-radiation. Proven to be an excellent protective film for buildings paneled with stainless steel, aluminum or glass. 224LB(light blue) is often referred to as "blue dragon" surface protection tape.
Backing Adhesive
(unwind)
Thickness
(total)
Liner Type
(outer)
PVC - Polyvinylchloride Acrylic 3.00 mil  
Adhesion to Steel
180° Peel
Adhesive Activation Tensile Strength Elongation Percent
4.50 oz/in Pressure 14.00 lbs/in 200.00%
Min Application
Temp
Min Service
Temp
Max Short-Term
Temp
Max Long-Term
Temp
59 °F 0 °F 104 °F  
Adhesive Tape Features
  • Clear or light blue
  • Conformable
  • Protects metals
  • Protects optical glass
  • BluMax or Blue Dragon
  • UV-resistant
  • Suitable for outdoor use
  • Film acts as a lubricant in deepdrawing
Adhesive Tape Applications
  • Stainless protection
  • Optical glass protection
  • Deepdrawing
  • Profiling and bending
Adhesive Tape Markets Served
  • Industrial
  • Electronics/Electrical
  • Construction
  • Glass Manufacturing
  • Extruders of Plastic and Rubber
Adhesive Tape Colors
  • Light Blue
Comparable products
Backing Adhesive Thickness Adhesion
 PVC - Polyvinylchloride   Acrylic   3.00mil   4.50oz/in 

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.


Choose the surface energy of the exact surface that the adhesive will contact (e.g. if the part was painted metal, paint would be the surface energy).