1432, Foil Constrained Layer Damper, Permacel/Nitto Denko America, adhesive tape datasheet

Home >

Permacel/Nitto Denko America 1432
Foil Constrained Layer Damper

General Information

Legetolex 1432 is a pressure sensitive, contrained-layer damper which has excellent adhesion to many substrates such as oily cold rolled steel, E-coat, primers and topcoats. It also bonds to many plastics including polypropylene. The aluminum foil constraining layer and specially formulated viscoelastic polymer layer combine to give effective vibration damping over a wide temperature range. It is available in various thicknesses and can have different gauge foil face sheets. It is provided in rectangular sheets and can be die-cut for special configurations. It is temperature resistant and will maintain adhseion through all automotive bake cycles including 200°C overbake conditions. This allows its application at any stage of the production cycle. It can be applied in pael fbrication or body-in-white before E-coat or afterwards to primed or top-coated sheet metal. It is compatible with automotive coatings and will not contaminate baths, spray operations or ovens. The superior adhesive properties allow it to be used in horizontal, vertical, or inverted applications. It has good conformability and can be applied on complex shapes.

Backing	Adhesive (unwind)	Thickness (total)	Liner Type (outer)

Adhesion to Steel 180° Peel	Adhesive Activation	Tensile Strength	Elongation Percent
	Pressure

Min Application Temp	Min Service Temp	Max Short-Term Temp	Max Long-Term Temp
40 °F	0 °F

Adhesive Tape Features

Specific gravity is 1.45
Hardness is 6.5 - 9.0mm

Adhesive Tape Applications

Adhesive Tape Markets Served

Adhesive Tape Colors

Comparable products

Permacel/Nitto Denko America 1432

Foil Constrained Layer Damper

Backing	Adhesive	Thickness	Adhesion
		mil	oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Converting Options

Converting Services

Budnick Converting offers a number of services to take the product you need and make it perfect for your application. With converting methods ranging from precision slitting or die-cutting to printing and coating, Budnick has the capabilities to create anything you can dream up.

Services

Precision Cutting

Die-Cutting

Slitting

Printing

Adhesive Coating

Finishing and Spooling

Next Steps

Learn More About Budnick

Contact Us

View Case Studies

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.