Call 800-282-0090

PerfecTearT Application Tape

General Information
GXP575 is a white, translucent, latex saturated paper used for vinyl graphics in sign making. A high tack paper application tape that consists of a self-wound, standard grade saturated backing coated with a specially formulated latex pressure sensitive adhesive. Excellent for pre-spaced lettering less than two inches small and medium sized one piece decals and hard to lift vinyls. All purpose application tape for most sign shop applications and surface protection.
Backing Adhesive
Liner Type
Crepe Paper Rubber 4.00 mil  
Adhesion to Steel
180° Peel
Adhesive Activation Tensile Strength Elongation Percent
15.00 oz/in Pressure 20.00 lbs/in 2.40%
Min Application
Min Service
Max Short-Term
Max Long-Term
40 °F 0 °F    
Adhesive Tape Features
  • White translucent latex saturated paper
  • Water based natural latex
  • High tack
  • Excellent for pre-spaced lettering less than 2" & small to medium sized decals
  • Good for hard to lift vinyls
Adhesive Tape Applications
  • Vinyl graphics used in sign making
  • Surface protection
Adhesive Tape Markets Served
  • Commercial printing
Adhesive Tape Colors
  • White
Comparable products
Backing Adhesive Thickness Adhesion
 Crepe Paper   Rubber   4.00mil   15.00oz/in 

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.

Choose the surface energy of the exact surface that the adhesive will contact (e.g. if the part was painted metal, paint would be the surface energy).