Budnick Converting ®
MACtac Inc.
IF2075
***Discontinued*** Laminating Adhesive
Discontinued IF2075 is a 5 mil thick acrylic adhesive transfer that is high tack and used for mounting nameplates, faceplates, decorative trim, foams, felts cloth, etc. The adhesive is protected by a two sided release treated, 74# polycoated white kraft liner. IF2075 provides aggressive tack and high shear strength for quick bonding and long term holding power. The unique acrylic adhesive bonds to a wide variety of materials including many low surface energy plastics. It has excellent shear properties which are maintained at elevated temperature resistance. The 2 mil thickness provides excellent adhesion to most surfaces. This thin adhesive enables nameplates and faceplates to maintain their low profile appearance.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | |
|---|---|
| Adhesive | Acrylic |
| Thickness | 5 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 80 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | -40° F |
| Max Short-Term Temp | 250° F |
| Max Long-Term Temp |
Product Features
- Quick Tack is 7#/sq. in. on stainless steel
- Shear strength is 300+ hours to fail (1000g/sq.in. @72°F)
- Resistant to water, detergent, alcohol, aliphatic and some aromatic hydrocarbons
- High tack
- Provides high shear strength for quick bonding and long term holding power
- Bonds to a wide variety of materials including many low surface energy plastics
- Excellent shear properties
Adhesive Tape Applications
- Mounting nameplates, faceplates, decorative trim, foams, felts, cloth,etc.
Comparable Products
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.