Converting Ideas into Solutions ®

MACtac Inc.
IF2012

***Discontinued*** Adhesive Transfer Tape

Discontinued IF2012 is a 2 mil thick, high performance, acrylic transfer adhesive. It provides aggressive tack and high shear strength for quick bonding & long term holding power. The adhesive has exellent ultra violet light stability and elevated temperature resistance. This thin adhesive enables nameplates and faceplates to maintain their low profile appearance.

Product Properties Related Information Custom Quote

Converting Services

At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.

Backing/Carrier
Adhesive Acrylic
Thickness 2 Mils
Tensile
Elongation
Adhesive Activation Pressure
Adhesion (unwind) 64 oz/in
Min. Application Temp 50° F
Min. Service Temp -40° F
Max Short-Term Temp 250° F
Max Long-Term Temp

Product Features

  • Quick tack is 4.0 #/sq.in.
  • Shear to Stainless Steel is 300+ hours to fail when loaded with 1000 g/sq.in.@72°F
  • Resistant to water, detergent, alcohol, aliphatic and some aromatic hydrocarbons
  • Aggressive tack
  • High shear strength for quick bonding & long term holding power
  • The adhesive has exellent ultra violet light stability and elevated temperature resistance
  • Complies with UL 969 Marking and Label Systems for both indoor and outdoor exposure conditions

Markets Served

  • Appliance
  • Automotive
  • Electronics

Adhesive Tape Applications

  • This thin adhesive enables nameplates and faceplates to maintain their low profile appearance

Data provided by Budnick Converting, Inc.

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.

Request More Information

For decades Budnick has provided customized solutions for specialty adhesive applications designed specifically for manufacturers. Whether you're looking to speed up production, improve product performance, or protect your products during transport, Budnick has a solution for your needs!