Call 800-282-0090


Home > Data Sheet
539
Medium Grade Flatback



General Information
539 is a 7.3 mil, medium grade flatback tape designed for various sealing and splicing jobs. It has low curl characteristics and is very conformable. Aggressive natural / synthetic rubber adhesive is designed to offer a positive, attractive seal and excellent adhesion to minimize carton sealing failures and prevent pilferage. #539 is designed for use in applications where reduced weight can provide packaging material savings. Product is not repulpable. It is used in carton sealing, packaging, silk screening, picture framing, beamingIleasing, splicing, and tabbing.
Backing Adhesive
(unwind)
Thickness
(total)
Liner Type
(outer)
Flatback Paper Rubber 7.00 mil  
Adhesion to Steel
180° Peel
Adhesive Activation Tensile Strength Elongation Percent
60.00 oz/in Pressure 36.00 lbs/in 7.00%
Min Application
Temp
Min Service
Temp
Max Short-Term
Temp
Max Long-Term
Temp
40 °F 0 °F    
Adhesive Tape Features
  • PPP-T-42C, Type II; C.I.D. A-A-883, Type II; C.I.D. A-A-1683B
  • Low curl characteristics
  • Very conformable
Adhesive Tape Applications
  • Designed for various sealing and splicing jobs
  • Carton Sealing
  • Packaging
  • Silk Screening
  • Picture Framing
  • BeamingILeasing
  • Splicing
  • Tabbing.
Adhesive Tape Markets Served
Adhesive Tape Colors
  • Brown
Comparable products
Backing Adhesive Thickness Adhesion
 Flatback Paper   Rubber   7.00mil   60.00oz/in 
Backing Adhesive Thickness Adhesion
 Flatback Paper   Rubber   6.70mil   25.00oz/in 
Backing Adhesive Thickness Adhesion
 Flatback Paper   Rubber   5.30mil   80.00oz/in 
Backing Adhesive Thickness Adhesion
 Flatback Paper   Rubber   6.80mil   63.00oz/in 

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.


Choose the surface energy of the exact surface that the adhesive will contact (e.g. if the part was painted metal, paint would be the surface energy).