Call 800-282-0090


Home > Data Sheet
PVC 4725
6 mil soft colored PVC



General Information
PVC 4725 is a 6 mil soft PVC tape with a synthetic rubber adhesive. It is used for color coding; lane marking and safety coding to meet OSHA requirements; decorating, striping on vehicles, boats, sporting equipment, etc.; masking for hard chrome plating & anodizing; harness and pipe wrapping; duct and joint sealing. PVC 4725 is of superior quality, with a long shelf-life, and "write-on" capability. It provides a very effective vapor and moisture barrier. It is highly conformable and resistant to aging, sun, water, fungus, bacteria, oil, acids, alkalis and corrosive chemicals. It provides good abrasion, impact and rupture resistance. Alternative to 3M #471. Moisture absorption Less than 1.5% ,Moisture vapor Less than 2.5% (gm/100 sq in/24 hrs, Metal corrosion None to copper, brass, steel, aluminum,Accelerated aging factor Greater than 100%(% of original adhesion to backing after aging) Government specifications Conforms to PPP-T-66E, Type 1,Class 2; MIL-T-4239z (black only); A-A-1689A
Backing Adhesive
(unwind)
Thickness
(total)
Liner Type
(outer)
PVC - Polyvinylchloride Rubber 6.00 mil  
Adhesion to Steel
180° Peel
Adhesive Activation Tensile Strength Elongation Percent
22.00 oz/in   16.00 lbs/in 150.00%
Min Application
Temp
Min Service
Temp
Max Short-Term
Temp
Max Long-Term
Temp
40 °F -20 °F 176 °F  
Adhesive Tape Features
  • Highly conformable
  • Moisture resistant
  • Write on capability
  • Good abrasion resistance
  • Resists aging
  • Bacteria & fungus resistant
Adhesive Tape Applications
  • Color coding
  • Aisle marking
  • Masking in chrome plating
  • Masking in annodizing
  • Duct & joint seal
  • Harnes & pipe wrap
  • Container sealing
Adhesive Tape Markets Served
  • Arts & Entertainment
  • Automotive
  • Industrial
  • Marine
  • Plastic bag manufacturing
  • Point of Purchase
Adhesive Tape Colors
  • Black
  • Clear
  • Gray
  • Orange
  • Purple
  • Red
  • White
  • Yellow
  • Light Green
  • Emerald
Comparable products
Backing Adhesive Thickness Adhesion
 PVC - Polyvinylchloride   Rubber   6.00mil   22.00oz/in 
Backing Adhesive Thickness Adhesion
 PVC - Polyvinylchloride   Rubber   5.00mil   18.00oz/in 
Backing Adhesive Thickness Adhesion
 PVC - Polyvinylchloride   Rubber   6.00mil   22.00oz/in 
Backing Adhesive Thickness Adhesion
 PVC - Polyvinylchloride   Rubber   5.40mil   26.00oz/in 

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.


Choose the surface energy of the exact surface that the adhesive will contact (e.g. if the part was painted metal, paint would be the surface energy).