Call 800-282-0090

4.5mil Low Density Polyethylene Film Tape

General Information
PEFILM 4540 is a 4.5 mil low density polyethylene film coated with a synthetic rubber adhesive. Its tough polyethylene backing offers good abrasion and tear resistance. The low tack adhesive is suitable for surface protection applications, and it is excellent for low temperature bonding. PEFILM 4540 is ideal for wire identification, surface protection, seaming, and splicing of films.
Backing Adhesive
Liner Type
PE - Polyethylene Rubber 7.00 mil  
Adhesion to Steel
180° Peel
Adhesive Activation Tensile Strength Elongation Percent
60.00 oz/in Pressure 18.00 lbs/in 80.00%
Min Application
Min Service
Max Short-Term
Max Long-Term
40 °F      
Adhesive Tape Features
  • Tough Polyethylene Backing
  • Good Abrasion and Tear Resistance
  • Excellent for Low Temperature Bonding
Adhesive Tape Applications
  • Wire Identification
  • Surface Protection
  • Seaming
  • Splicing of Films
Adhesive Tape Markets Served
  • Industrial
Adhesive Tape Colors
  • Black
  • Clear
  • Red
  • White
Comparable products
Backing Adhesive Thickness Adhesion
 PE - Polyethylene   Rubber   7.00mil   60.00oz/in 

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.

Choose the surface energy of the exact surface that the adhesive will contact (e.g. if the part was painted metal, paint would be the surface energy).