Call 800-282-0090


DISPNSR 5101
Definite Length Tape Dispenser



General Information
DISPNSR 5101 is a definite length single coated tape dispenser for rolls up to 1" wide. It dispenses .25" wide tape up to 1" lengths and .5" wide up to 4" in length with a single pull of the lever. The tape is cut by pulling across a serrated blade. The moveable blade holder makes for easy tape loading. It has a heavy base for stability and holds up to 4.75" roll diameters on 3" cores.
Backing Adhesive
(unwind)
Thickness
(total)
Liner Type
(outer)
       
Adhesion to Steel
180° Peel
Adhesive Activation Tensile Strength Elongation Percent
       
Min Application
Temp
Min Service
Temp
Max Short-Term
Temp
Max Long-Term
Temp
       
Adhesive Tape Features
Adhesive Tape Applications
Adhesive Tape Markets Served
Adhesive Tape Colors
Comparable products
DISPNSR 5101 is a definite length single coated tape dispenser for rolls up to 1" wide. It dispenses .25" wide tape up to 1" lengths and .5" wide up to 4" in length with a single pull of the lever.

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.


Choose the surface energy of the exact surface that the adhesive will contact (e.g. if the part was painted metal, paint would be the surface energy).