Call 800-282-0090

1.8 mil Hot Melt Rubber PP Carton Sealing

General Information
CARTBOPP 3202 is a 1.8 Mil (0.046MM - 27 micron) industrial grade polypropylene cast film carton sealing tape with a hot melt rubber based adhesive. Meets ASTM D-5486 standards. Neutral core.
Backing Adhesive
Liner Type
PP - Polypropylene Rubber 1.80 mil  
Adhesion to Steel
180° Peel
Adhesive Activation Tensile Strength Elongation Percent
32.00 oz/in Pressure 27.00 lbs/in 70.00%
Min Application
Min Service
Max Short-Term
Max Long-Term
40 °F      
Adhesive Tape Features
  • Hot Melt Rubber Adhesive
  • Standard Grade
  • Meets ASTM D_5486 Standards
Adhesive Tape Applications
  • Carton Sealing
Adhesive Tape Markets Served
  • Industrial
Adhesive Tape Colors
  • Transparent
Comparable products
Backing Adhesive Thickness Adhesion
 PP - Polypropylene   Rubber   1.80mil   32.00oz/in 

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.

Choose the surface energy of the exact surface that the adhesive will contact (e.g. if the part was painted metal, paint would be the surface energy).