Call 800-282-0090

UPVC Bag Sealing/Produce Tape

General Information
BAGSEAL 3437 is a 2.4 Mil (35 micron) UPVC coated film with a solvent-based natural rubber adhesive. This medium grade tape is seals polyethylene and other film bags swiftly and efficiently, and is also used for color coding the age of perishables. 3" neutral core.
Backing Adhesive
Liner Type
UPVC - Unplasticized Polyvinylchloride Rubber 2.40 mil  
Adhesion to Steel
180° Peel
Adhesive Activation Tensile Strength Elongation Percent
15.00 oz/in Pressure 42.00 lbs/in 75.00%
Min Application
Min Service
Max Short-Term
Max Long-Term
40 °F   176 °F  
Adhesive Tape Features
  • Medium Grade
  • 2.4 Mil UPVC film
  • Solvent-Based Natural Rubber Adhesive
Adhesive Tape Applications
  • Sealing Polyethylene and Other Film Bags
  • Color Coding
Adhesive Tape Markets Served
  • Industrial
  • Plastic bag manufacturing
Adhesive Tape Colors
  • Black
  • Orange
  • Red
  • Yellow
  • Light Green
  • Dark Green
Comparable products
Backing Adhesive Thickness Adhesion
 UPVC - Unplasticized Polyvinylchloride   Rubber   2.40mil   15.00oz/in 

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.

Choose the surface energy of the exact surface that the adhesive will contact (e.g. if the part was painted metal, paint would be the surface energy).