Call 800-282-0090


Home > Data Sheet
APLICATR 5013
2" Carton Sealing Tape Applicator (no handle)



General Information
APLICATR 5013 is an economical carton sealing dispenser without a handle. It is made for rolls up to 2" wide. It has a plastic frame and new static cling strip to keep tape in "ready to use" position that saves production time.
Backing Adhesive
(unwind)
Thickness
(total)
Liner Type
(outer)
       
Adhesion to Steel
180° Peel
Adhesive Activation Tensile Strength Elongation Percent
       
Min Application
Temp
Min Service
Temp
Max Short-Term
Temp
Max Long-Term
Temp
       
Adhesive Tape Features
Adhesive Tape Applications
Adhesive Tape Markets Served
Adhesive Tape Colors
Comparable products
APLICATR 5013 is an economical carton sealing dispenser without a handle. It is made for rolls up to 2" wide. It has a plastic frame and new static cling strip to keep tape in "ready to use" position that saves production time.

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.


Choose the surface energy of the exact surface that the adhesive will contact (e.g. if the part was painted metal, paint would be the surface energy).