Call 800-282-0090


APLICATR 5003
Reverse Wound Transfer Tape Gun



General Information
APLICATR 5003 is for reverse wound transfer tapes on 1" plastic cores. This dispenser has a special pin spol allowing use of complete roll without any waste, friction or effort. It is also provided with an adjustable gear, just rotate spool to make it work. It weighs less than 1 lb. with tape . It fits all 36 yd. 2 mil and 18 yd. 5 mil ATG tape. It can't be used for 60 yd. rolls.
Backing Adhesive
(unwind)
Thickness
(total)
Liner Type
(outer)
    4.80 mil  
Adhesion to Steel
180° Peel
Adhesive Activation Tensile Strength Elongation Percent
       
Min Application
Temp
Min Service
Temp
Max Short-Term
Temp
Max Long-Term
Temp
       
Adhesive Tape Features
Adhesive Tape Applications
Adhesive Tape Markets Served
Adhesive Tape Colors
Comparable products
APLICATR 5003 (ATG gun) is for reverse wound transfer tapes on 1" plastic cores. It fits all 36 yd. 2 mil and 18 yd. 5 mil ATG tape.

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.


Choose the surface energy of the exact surface that the adhesive will contact (e.g. if the part was painted metal, paint would be the surface energy).