Call 800-282-0090


APLICATR 5001
Hand Held Double Coated Tape Applicator



General Information
APLICATR 5001 is a hand held double coated tape applicator for up to 2" wide rolls. It applies tape to working surfaces while rewinding the liner on the take-up spool. Heavy formed steel frame for long life. It has an adjustable tension brake on the tape roll holder and scrap rewind spool which insures proper performances with any weight tape. APLICATR 5001 is not recommended for thick, difficult to cut tapes. It has a 3" core that holds rolls up to 5.5" diameter.
Backing Adhesive
(unwind)
Thickness
(total)
Liner Type
(outer)
       
Adhesion to Steel
180° Peel
Adhesive Activation Tensile Strength Elongation Percent
       
Min Application
Temp
Min Service
Temp
Max Short-Term
Temp
Max Long-Term
Temp
       
Adhesive Tape Features
Adhesive Tape Applications
Adhesive Tape Markets Served
Adhesive Tape Colors
Comparable products
APLICATR 5001 is a hand held double coated tape applicator for up to 2" wide rolls. It applies tape to working surfaces while rewinding the liner on the take-up spool.

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.


Choose the surface energy of the exact surface that the adhesive will contact (e.g. if the part was painted metal, paint would be the surface energy).