244-2JSF, Tensilized PTFE, DeWal Industries, adhesive tape datasheet

Home >

DeWal Industries 244-2JSF
Tensilized PTFE

General Information

244-2JSF 3.5 mil, skived and tensilized PTFE film that is coated with a pressure sensitive acrylic adhesive. The tensilized film provied a higher tensile strength, lower elongation and higher dielectic strength than traditional skived PTFE film. 244-2 JSF has been surfaced treated on the top side to render it bondable to itself or other materials. This product is used in various aerospace release application within composite constructions. This tape is also used in electrical applications where good insulation and heat resistance is required. Some examples of this are: harness wrapping, transformers and coil wrap constructions.

Backing	Adhesive (unwind)	Thickness (total)	Liner Type (outer)
PTFE - Skived	Acrylic	3.50 mil

Adhesion to Steel 180° Peel	Adhesive Activation	Tensile Strength	Elongation Percent
30.00 oz/in	Pressure	30.00 lbs/in	10.00%

Min Application Temp	Min Service Temp	Max Short-Term Temp	Max Long-Term Temp
40 °F	0 °F	400 °F

Adhesive Tape Features

Provied a higher tensile strength
Lower elongation
Higher dielectic strength
Bondable to itself or other materials
Good insulation
Good heat resistance

Adhesive Tape Applications

Used in various aerospace release application within composite constructions
Used in electrical applications such as
Harness wrapping
Transformers
Coil wrap constructions

Adhesive Tape Markets Served

Adhesive Tape Colors

Comparable products

DeWal Industries 244-2JSF

Tensilized PTFE

Backing	Adhesive	Thickness	Adhesion
PTFE - Skived	Acrylic	3.50mil	30.00oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Converting Options

Converting Services

Budnick Converting offers a number of services to take the product you need and make it perfect for your application. With converting methods ranging from precision slitting or die-cutting to printing and coating, Budnick has the capabilities to create anything you can dream up.

Services

Precision Cutting

Die-Cutting

Slitting

Printing

Adhesive Coating

Finishing and Spooling

Next Steps

Learn More About Budnick

Contact Us

View Case Studies

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.