242-2, Silicone Free Tensilized PTFE, DeWal Industries, adhesive tape datasheet

Home >

DeWal Industries 242-2
Silicone Free Tensilized PTFE

General Information

242-2 is a 2 mil, silicone Free PTFE pressure sensitive tape made from a skived and tensilized PTFE film that is coated with a rubber pressure sensitive adhesive. The tensilized film provides higher tensile strength, lower elongation and higher dielectric strength than a regular skived film. This product has been specifically designed for the Aerospace Composite Industry where silicone contamination is a frequent problem. The tensilized film provides good conformability and smooth application to curved surfaces. This product can withstand autoclave cycles up to 350°F.

Backing	Adhesive (unwind)	Thickness (total)	Liner Type (outer)
PTFE - Skived	Rubber	4.00 mil

Adhesion to Steel 180° Peel	Adhesive Activation	Tensile Strength	Elongation Percent
35.00 oz/in		30.00 lbs/in	100.00%

Min Application Temp	Min Service Temp	Max Short-Term Temp	Max Long-Term Temp
40 °F	0 °F	350 °F

Adhesive Tape Features

Silicone Free skived and tensilized PTFE pressure sensitive tape
Tensilized film provides higher tensile strength, lower elongation and higher dielectric strength than a regular skived film
The tensilized film provides good conformability and smooth application to curved surfaces
The tensilized film provides good conformability and smooth application to curved surfaces
This product can withstand autoclave cycles up to 350°F

Adhesive Tape Applications

Specifically designed for the Aerospace Composite Industry where silicone contamination is a frequent problem

Adhesive Tape Markets Served

Adhesive Tape Colors

Comparable products

DeWal Industries 242-2

Silicone Free Tensilized PTFE

Backing	Adhesive	Thickness	Adhesion
PTFE - Skived	Rubber	4.00mil	35.00oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Converting Options

Converting Services

Budnick Converting offers a number of services to take the product you need and make it perfect for your application. With converting methods ranging from precision slitting or die-cutting to printing and coating, Budnick has the capabilities to create anything you can dream up.

Services

Precision Cutting

Die-Cutting

Slitting

Printing

Adhesive Coating

Finishing and Spooling

Next Steps

Learn More About Budnick

Contact Us

View Case Studies

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.