204-10, Skived PTFE Tape, DeWal Industries, adhesive tape datasheet

Home >

DeWal Industries 204-10
Skived PTFE Tape

General Information

204-10 is a skived PTFE film coated with a "high temperature" silicone adhesive. It is used in electrical applications such as coil wraps, separators, transformers, slot liner and harness wrapping where good insulation and heat resistance properties are required. They are also used in mechanical applications requiring high temperature resistance, a low friction surface or a non-stick surface.

Backing	Adhesive (unwind)	Thickness (total)	Liner Type (outer)
PTFE - Skived	Silicone	13.00 mil

Adhesion to Steel 180° Peel	Adhesive Activation	Tensile Strength	Elongation Percent
55.00 oz/in	Pressure	60.00 lbs/in	300.00%

Min Application Temp	Min Service Temp	Max Short-Term Temp	Max Long-Term Temp
40 °F	0 °F	500 °F

Adhesive Tape Features

UL approved Flame Retardant / Cold Resistant
High temperature PTFE where good insulation and heat resistance properties are required

Adhesive Tape Applications

Used in electrical applications such as coil wraps, separators, transformers, slot liner and harness wrapping
Mechanical applications requiring high temperature resistance, a low friction surface or a non-stick surface

Adhesive Tape Markets Served

Adhesive Tape Colors

Comparable products

DeWal Industries 204-10

Skived PTFE Tape

Backing	Adhesive	Thickness	Adhesion
PTFE - Skived	Silicone	13.00mil	55.00oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Permacel/Nitto Denko America P424

10-Mil PTFE Film Tape

Backing	Adhesive	Thickness	Adhesion
PTFE - Skived	Silicone	12.00mil	45.00oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Saint-Gobain 2045-10

Skived PTFE Tape

Backing	Adhesive	Thickness	Adhesion
PTFE - Skived	Silicone	11.50mil	45.00oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Converting Options

Converting Services

Budnick Converting offers a number of services to take the product you need and make it perfect for your application. With converting methods ranging from precision slitting or die-cutting to printing and coating, Budnick has the capabilities to create anything you can dream up.

Services

Precision Cutting

Die-Cutting

Slitting

Printing

Adhesive Coating

Finishing and Spooling

Next Steps

Learn More About Budnick

Contact Us

View Case Studies

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.