Call 800-282-0090


65SC.50
6.5# Soft Compression PVC Foam Tape



General Information
65SC.50 is a 1/2" thick, closed cell Polyvinyl Chloride (PVC) foam sealant, with an acrylic adhesive on one side. It was designed to provide an economical solution to seal against light, air, and moisture. It has been specially formulated to provide superior performance and soft compression. It is typically recommended to compress PVC foam gaskets 30% to 50% to ensure maximum seal.
Backing Adhesive
(unwind)
Thickness
(total)
Liner Type
(outer)
PVC - Polyvinylchloride Acrylic 500.00 mil Heavy Duty Paper
Adhesion to Steel
180° Peel
Adhesive Activation Tensile Strength Elongation Percent
26.00 oz/in Pressure 14.00 lbs/in 110.00%
Min Application
Temp
Min Service
Temp
Max Short-Term
Temp
Max Long-Term
Temp
50 °F -40 °F 180 °F  
Adhesive Tape Features
  • Soft Compression
  • Tacky Acrylic Adhesive
  • Also available in other thicknesses
  • Sturdy liner resist stretching & removes easily
  • 5% max. water absorption
Adhesive Tape Applications
  • Light, air & moisture seal
  • Seal between appliance components
  • Metal separation seal
Adhesive Tape Markets Served
  • Appliance
  • Construction
  • Automotive
  • Industrial
  • Marine
  • Recreational
  • Truck and trailer body
Adhesive Tape Colors
  • Black
Comparable products
Backing Adhesive Thickness Adhesion
 PVC - Polyvinylchloride   Acrylic   500.00mil   26.00oz/in 

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.


Choose the surface energy of the exact surface that the adhesive will contact (e.g. if the part was painted metal, paint would be the surface energy).