Budnick Converting ®
Budnick Converting
65SC.50
**Discontinued*6.5# Soft Compression PVC Foam Tape
**Discontinued see Novagard 70P UL**65SC.50 is a 1/2" thick, closed cell Polyvinyl Chloride (PVC) foam sealant, with an acrylic adhesive on one side. It was designed to provide an economical solution to seal against light, air, and moisture. It has been specially formulated to provide superior performance and soft compression. It is typically recommended to compress PVC foam gaskets 30% to 50% to ensure maximum seal. Meets UL94 HBF.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PVC - Polyvinylchloride |
|---|---|
| Adhesive | Acrylic |
| Thickness | 500 Mils |
| Tensile | 14.00 lbs/in |
|---|---|
| Elongation | 110.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 26 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | -40° F |
| Max Short-Term Temp | 180° F |
| Max Long-Term Temp |
Product Features
- Soft Compression
- Tacky Acrylic Adhesive
- Also available in other thicknesses
- Sturdy liner resist stretching & removes easily
- 5% max. water absorption
- Meets UL 94 HBF
Markets Served
- Appliance
- Construction
- Automotive
- Industrial
- Marine
- Recreational
- Truck and trailer body
Adhesive Tape Applications
- Light, air & moisture seal
- Seal between appliance components
- Metal separation seal
Adhesive Tape Colors
- Black
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.