Budnick Converting ®
Avery Dennison
MS3032SL
***Discontinued*** Adhesive Transfer
Discontinued MS3032SL is a 2.0 mil, single linered adhesive transfer. It is primarily used for membrane touch switch assemblies and graphic overlays. Specification #56520
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | |
|---|---|
| Adhesive | Acrylic |
| Thickness | 2 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 74 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 400° F |
| Max Long-Term Temp | 300° F |
Product Features
- Unsupported specially formulated acrylic adhesive
- Adhesive protected by a moisture stable polycoated liner
- 180° peel to polypropylene = 56 oz/in, to polyester = 69 oz/in & to polycarbonate = 86 oz/in
- Static shear: 1000 grams at 72° upon a .5" square area>10,000 minutes to failure
- Surface resistivity: ASTM D 257; 7.3 E 12 ohms square
- Good adhesion to high surface energy plastics and metals
- Excellent shear strength
- Chemical and UV resistance
- Stable performance over time
- Ease of die-cutting and liner removal
- Moisture stable liner provides layflat for easy processing
Adhesive Tape Applications
- Specially designed for use on membrance touch switch assemblies and graphic overlays
Comparable Products
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.