MS1155 WSF, Adhesive Transfer Tape (Discontinued), Avery Dennison, adhesive tape datasheet

Home >

Avery Dennison MS1155 WSF
Adhesive Transfer Tape (Discontinued)

General Information

***DISCONTINUED USE 1158, 1126*** MS1155 WSF is a 5mil acrylic used to bond low surface energy substrates such as graphics and foam. Specially designed graphics and foam bonding uses under moderate/high temperature conditions.

Backing	Adhesive (unwind)	Thickness (total)	Liner Type (outer)
	Acrylic	5.00 mil	Paper (4.6 mil, 63# poly-coated, printed)

Adhesion to Steel 180° Peel	Adhesive Activation	Tensile Strength	Elongation Percent
	Pressure

Min Application Temp	Min Service Temp	Max Short-Term Temp	Max Long-Term Temp
50 °F	0 °F	300 °F	200 °F

Adhesive Tape Features

Adhesive properties (180° Peel Adhesion) HDPE: 79 oz Force/inch; Polypropylene: 135 oz Force/inch; Oily Panel: 130 oz Force/inch; Powder Coated Panel: 127 oz Force/inch
Excellent adhesion to LSE substrates, lightly oiled and powder coated panels
Good adhesion to foams and most other substrates
Chemical, humidity and UV resistance
Stable performance over time
Ease of die-cutting and liner removal
Moisture stable liner provides layflat for easy processing
Very high initial tack

Adhesive Tape Applications

Specially designed graphics and foam bonding uses under moderate/high temperature conditions

Adhesive Tape Markets Served

Adhesive Tape Colors

Comparable products

Avery Dennison MS1155 WSF

Adhesive Transfer Tape (Discontinued)

Backing	Adhesive	Thickness	Adhesion
N/A	Acrylic	5.00mil	oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 3

Converting Options

Converting Services

Budnick Converting offers a number of services to take the product you need and make it perfect for your application. With converting methods ranging from precision slitting or die-cutting to printing and coating, Budnick has the capabilities to create anything you can dream up.

Services

Precision Cutting

Die-Cutting

Slitting

Printing

Adhesive Coating

Finishing and Spooling

Next Steps

Learn More About Budnick

Contact Us

View Case Studies

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.