9500, XHA Double Coated Acrylic Foam, Avery Dennison, adhesive tape datasheet

Home >

Avery Dennison 9500
XHA Double Coated Acrylic Foam

General Information

XHA™ 9500 is a series of double coated elastomeric foam. It delivers a quick initial bond & achieves superior adhesion to LSE materials. An exceptionally durable technology. XHA™ is engineereded for the most demanding industrial applications. Specifically designed for attaching automotive exterior trim such as name plates, body side moldings, wheel flares, etc. to automotive clear coat paints.

Backing	Adhesive (unwind)	Thickness (total)	Liner Type (outer)
Elastomeric Foam		45.00 mil	Film (white)

Adhesion to Steel 180° Peel	adhesion to steel 180° peel - liner side	Tensile Strength	Elongation Percent
130.00 oz/in	130.00 oz/in

Min Application Temp	Min Service Temp	Max Short-Term Temp	Max Long-Term Temp
50 °F	0 °F	250 °F	200 °F

Adhesive Tape Features

100% black construction through out
Static shear - 6000+ minutes to failure when initial 1"sq loaded with 500g
180° Peel Adhesion (oz force/inch width) on TPO is 70, BSF Ureglos is 55, PPG Carbamate is 50 (PSTC-3, ASTM D-3330, STD-10)
Primerless on most TPO surfaces
Cold impact resistance
Excellent UV & gasoline resistance

Adhesive Tape Applications

Specifically designed for attaching automotive exterior trim such as name plates, body side moldings, wheel flares, etc. to automotive clear coat paints

Adhesive Tape Markets Served

Adhesive Tape Colors

Comparable products

Avery Dennison 9500

XHA Double Coated Acrylic Foam

Backing	Adhesive	Thickness	Adhesion
Elastomeric Foam		45.00mil	130.00oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Converting Options

Converting Services

Budnick Converting offers a number of services to take the product you need and make it perfect for your application. With converting methods ranging from precision slitting or die-cutting to printing and coating, Budnick has the capabilities to create anything you can dream up.

Services

Precision Cutting

Die-Cutting

Slitting

Printing

Adhesive Coating

Finishing and Spooling

Next Steps

Learn More About Budnick

Contact Us

View Case Studies

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.