702P, Double Coated Clear Polyester, Avery Dennison, adhesive tape datasheet

Home >

Avery Dennison 702P
Double Coated Clear Polyester

General Information

702P is a 5 mil double coated with a .5 mil polyester carrier that is primarily used for bonding where plasticizer and temperature resistance is needed. It has a heavy mass of adhesive on the liner side and is designed for bonding to a wide variety of plastic, metal and foam substrates. Specification # 55810.

Backing	Adhesive (unwind)	Thickness (total)	Liner Type (outer)
PET - Polyester	Acrylic	5.00 mil	Paper (Polycoated kraft,4.5mil)

Adhesion to Steel 180° Peel	adhesion to steel 180° peel - liner side	Tensile Strength	Elongation Percent
61.00 oz/in	74.00 oz/in

Min Application Temp	Min Service Temp	Max Short-Term Temp	Max Long-Term Temp
50 °F	0 °F	275 °F	225 °F

Adhesive Tape Features

Specially formulated adhesive
Polyester carrier
Moisture stable release liner
Heavy mass of adhesive-liner side
Loop tack to stainless = 40 oz/in on the unwind side & 65 oz/in on the liner side
Static shear: 5.5 lbs at 72° upon a 1" area > 3000 minutes to failure
Stability in processing & die cutting
Temperature resistant
Solvent resistant
Plasticizer resistant

Adhesive Tape Applications

Automotive interior trim
Any metal to plasic bonding
Foam bonding
ABS plastic
Aluminum-anodized
Foam-polyester urethane
Foam-polyether urethane
Ceramic
Metal
Polycarbonate (lexan&reg)
PVC-mildly plasticized
Stainless

Adhesive Tape Markets Served

Adhesive Tape Colors

Clear

Comparable products

Avery Dennison 702P

Double Coated Clear Polyester

Backing	Adhesive	Thickness	Adhesion
PET - Polyester	Acrylic	5.00mil	61.00oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Converting Options

Converting Services

Budnick Converting offers a number of services to take the product you need and make it perfect for your application. With converting methods ranging from precision slitting or die-cutting to printing and coating, Budnick has the capabilities to create anything you can dream up.

Services

Precision Cutting

Die-Cutting

Slitting

Printing

Adhesive Coating

Finishing and Spooling

Next Steps

Learn More About Budnick

Contact Us

View Case Studies

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.