3081-53, Heat Activated Film/Pressure-Sensitive, Avery Dennison, adhesive tape datasheet

Home >

Avery Dennison 3081-53
Heat Activated Film/Pressure-Sensitive

General Information

HapsBond 3081-53 is a 4.0 mil, heat activated film/pressure-sensitive adhesive system. It is primarily used for heat laminating to difficult substrates such as styrafoam, to create a pressure-sensitive product. The pressure-sensitive adhesive resists elevated temperatures, plasticizers, and UV exposure. Specification #55844

Backing	Adhesive (unwind)	Thickness (total)	Liner Type (outer)
	Acrylic	4.00 mil	Paper (100# supertuff,5.3mil)

Adhesion to Steel 180° Peel	adhesion to steel 180° peel - liner side	Tensile Strength	Elongation Percent
55.00 oz/in	74.00 oz/in

Min Application Temp	Min Service Temp	Max Short-Term Temp	Max Long-Term Temp
50 °F	0 °F	250 °F	200 °F

Adhesive Tape Features

HapsBond&TM;
Heat Activated film on the unwindside
Acrylic PSA adhesive on liner side
Heavy kraft release liner
Static Shear: 5.5 lbs. at 72°F upon a 1" square area>800 minutes to failure
Excellent UV and temperature resistance
When hot laminated will bond to materials not normally suitable for pressure-sensitive adhesives like styrafoam

Adhesive Tape Applications

Designed for heat laminating to difficult substrates such as styrafoam
Resists elevated temperatures
Resists plasticizers
Resists UV exposure

Adhesive Tape Markets Served

Adhesive Tape Colors

Comparable products

Avery Dennison 3081-53

Heat Activated Film/Pressure-Sensitive

Backing	Adhesive	Thickness	Adhesion
	Acrylic	4.00mil	55.00oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Converting Options

Converting Services

Budnick Converting offers a number of services to take the product you need and make it perfect for your application. With converting methods ranging from precision slitting or die-cutting to printing and coating, Budnick has the capabilities to create anything you can dream up.

Services

Precision Cutting

Die-Cutting

Slitting

Printing

Adhesive Coating

Finishing and Spooling

Next Steps

Learn More About Budnick

Contact Us

View Case Studies

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.