Call 800-282-0090


SJ3527N
Scotchmate™ Indoor Reclosable Fastening Loop



General Information
SJ3527N is a 5/8" wide nylon 6,6 black loop with a synthetic rubber adhesive that is suited for attachment to low surface energy substrates. It offers closure alternatives to zippers, screws, snaps, hooks, bolts and more. The hook & loop fastener consist of two strips of nylon fabric which engage to form a quick fastening attachment. Simply pull the strips apart by hand to disengage. The woven loop backing is covered with thousands of soft, pliable napped loops, providing for thousands of openings and closings. Application ideas are anti-scratch, medical braces, attaching exhibit displays, vibration & sound damping control, access panel & door closure and attaching accessories and equipment. ** not recommended for plasticized surfaces, test carefully on highly textured surfaces. See 3M data sheet for many more details.
Backing Adhesive
(unwind)
Thickness
(total)
Liner Type
(outer)
  Rubber 0.12 mil  
Adhesion to Steel
180° Peel
Adhesive Activation Tensile Strength Elongation Percent
24.00 oz/in   13.50 lbs/in  
Min Application
Temp
Min Service
Temp
Max Short-Term
Temp
Max Long-Term
Temp
       
Adhesive Tape Features
  • Adhesive is especially suited for attachment to low surface energy substrates such as polyethylene, polypropylene
  • Nylon The woven loop backing is covered with thousands of soft, pliable napped loops, providing for thousands of openings and closings
  • Combined with SJ3526N, offers closure alternatives to zippers, screws, snaps, hooks, bolts and more
  • 5000 uses life cycle
Adhesive Tape Applications
  • Anti-scratch
  • Attaching accessory equipment
  • POP displays
  • Access panel closure
  • Medical braces
  • Vibration & sound damping
Adhesive Tape Markets Served
  • Arts & Entertainment
  • Automotive
  • Construction
  • Industrial
  • Point of Purchase
  • Recreational
  • Recreational
Adhesive Tape Colors
  • Black
Comparable products
Backing Adhesive Thickness Adhesion
    Rubber   0.12mil   24.00oz/in 

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.


Choose the surface energy of the exact surface that the adhesive will contact (e.g. if the part was painted metal, paint would be the surface energy).