Call 800-282-0090

Scotchmate™ Indoor Reclosable Fastening Hook

General Information
SJ3526N is a nylon black hook with a synthetic rubber adhesive that is suited for attachment to low surface energy substrates. It offers closure alternatives to zippers, screws, snaps, hooks, bolts and more. The hook & loop fastener consist of two strips of nylon fabric which engage to form a quick fastening attachment. Simply pull the strips apart by hand to disengage. The j shaped hooks are about 300 per square inch. Application ideas are anti-scratch, medical braces, attaching exhibit displays, vibration & sound damping control, access panel & door closure and attaching accessories and equipment. ** not recommended for plasticized surfaces, test carefully on highly textured surfaces. See 3M data sheet for many more details.
Backing Adhesive
Liner Type
  Rubber 0.09 mil  
Adhesion to Steel
180° Peel
Adhesive Activation Tensile Strength Elongation Percent
24.00 oz/in Pressure 13.50 lbs/in  
Min Application
Min Service
Max Short-Term
Max Long-Term
Adhesive Tape Features
  • Adhesive is especially suited for attachment to low surface energy substrates such as polyethylene, polypropylene
  • Nylon hooks are coated on the backside with a firm synthetic rubber pressure sensitive adhesive designed to function for indoor applications
  • Combined with SJ3527N, offers closure alternatives to zippers, screws, snaps, hooks, bolts and more
  • The woven hook is covered with flexible J shaped hooks
  • 300 hooks per square inch
  • 5,000 use life cycle
Adhesive Tape Applications
  • Graphic & exhibit attachment
  • POP displays
  • Attaching accessory equipment
  • Access panel closure
  • Medical braces
  • Recreational gear
  • Vibration & sound damping
Adhesive Tape Markets Served
  • Arts & Entertainment
  • Automotive
  • Construction
  • Industrial
  • Point of Purchase
  • Recreational
Adhesive Tape Colors
  • Black
Comparable products
Backing Adhesive Thickness Adhesion
    Rubber   0.09mil   24.00oz/in 

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.

Choose the surface energy of the exact surface that the adhesive will contact (e.g. if the part was painted metal, paint would be the surface energy).