Call 800-282-0090

VHB™ Adhesive Transfer Tape

General Information
F9469C is a 5 mil, firm acrylic adhesive transfer tape. It features very high shear holding power and the bond strength increases substantially with natural aging. These VHB™ transfer tapes are transparent and are ideal for use in many interior and extrerior industrial applications to replace rivets, spot welds, liquid adhesives, and other permanent fasteners.
Backing Adhesive
Liner Type
  Acrylic 5.00 mil  
Adhesion to Steel
180° Peel
Adhesive Activation Tensile Strength Elongation Percent
128.00 oz/in Pressure 100.00 lbs/in  
Min Application
Min Service
Max Short-Term
Max Long-Term
60 °F 0 °F 500 °F 300 °F
Adhesive Tape Features
  • High shear holding power
  • 100 MP adhesive
  • Bond strength increases with natural aging
Adhesive Tape Applications
  • Suited for use in many interior & exterior applications
  • Often replaces mechanical fasteners, glues, epoxy or welds
  • Suitable for bonding: sealed wood, many plastics, composites, etc.
Adhesive Tape Markets Served
  • Appliance
  • Construction
  • Glass Manufacturing
Adhesive Tape Colors
Comparable products
Backing Adhesive Thickness Adhesion
 N/A   Acrylic   5.00mil   128.00oz/in 

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.

Choose the surface energy of the exact surface that the adhesive will contact (e.g. if the part was painted metal, paint would be the surface energy).