9495, Double Coated Tape with 200MP Adhesive, 3M, adhesive tape datasheet

Home >

3M 9495
Double Coated Tape with 200MP Adhesive

General Information

A 5.6 mil. tape with a polyester backing and 200MP acrylic adhesive coated on both sides is primarily used for graphic overlays and attaching LED lenses. The carrier provides easier handling during slitting and die-cutting, while 200MP adhesive is not recommended for low energy plastics, such as polypropylene and polyethylene. Adhesive provides exceptional temperature and chemical resistance. 9495B has a black polyester film to provide opacity and visibility. 9495BF is a clear polyester film with clear, 2 mil, PET liner to provide opacity or visibility for ease in rotary die-cutting and applications that demand low particle generating parts. Also available is 9495MP which is a clear PET with a 4mil, 58# polycoated, printed, kraft paper liner.

Backing	Adhesive (unwind)	Thickness (total)	Liner Type (outer)
PET - Polyester	Acrylic	5.60 mil	Paper (4.0 mil. 58# polycoated kraft, printed)

Adhesion to Steel 180° Peel	adhesion to steel 180° peel - liner side	Tensile Strength	Elongation Percent

Min Application Temp	Min Service Temp	Max Short-Term Temp	Max Long-Term Temp
50 °F	0 °F	300 °F	250 °F

Adhesive Tape Features

90° peel strength to stainless steel: 100oz./in.
90° peel strength to acrylic: 60oz./in.
90° peel strength to polycarbonate: 60oz./in.
90° peel adhesion to ABS: 62oz./in.
Dimensional stability offers improved handling with ease of slitting and die cutting
High temperature resistance
Chemical resistant

Adhesive Tape Applications

Graphic overlays, nameplates, appliques and decorative trim
Attaching LED lenses in cellular phones and pagers

Adhesive Tape Markets Served

Adhesive Tape Colors

Black

Comparable products

3M 9495

Double Coated Tape with 200MP Adhesive

Backing	Adhesive	Thickness	Adhesion
PET - Polyester	Acrylic	5.60mil	oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Converting Options

Converting Services

Budnick Converting offers a number of services to take the product you need and make it perfect for your application. With converting methods ranging from precision slitting or die-cutting to printing and coating, Budnick has the capabilities to create anything you can dream up.

Services

Precision Cutting

Die-Cutting

Slitting

Printing

Adhesive Coating

Finishing and Spooling

Next Steps

Learn More About Budnick

Contact Us

View Case Studies

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.