Call 800-282-0090


Home > Data Sheet
927
High Tack Adhesive Transfer Tape



General Information
A 2.0 mil. tape that features 300 acrylic adhesive without a carrier, used for splicing, laminating and general purpose applications. 300 adhesive is a medium-firm acrylic pressure-sensitive adhesive system. If features very high initial adhesion and good shear holding power to a wide variety of materials, including many plastics. 927 tape is not recommended for direct exposure to sunlight or other sources of ultra violet (UV) light, however, edge exposure is generally satisfactory. This tape has relatively good resistance to moderate amounts of plasticizers. Applications may be subjectively evaluated by the user testing the tape in contact with the materials at conditions of 150°F for a period of 5 - 7 days. See 3M data sheet for Suggested Application Equipment.
Backing Adhesive
(unwind)
Thickness
(total)
Liner Type
(outer)
  Acrylic 2.00 mil Paper ( 4.0 mil. tan)
Adhesion to Steel
180° Peel
Adhesive Activation Tensile Strength Elongation Percent
60.00 oz/in Pressure    
Min Application
Temp
Min Service
Temp
Max Short-Term
Temp
Max Long-Term
Temp
40 °F 0 °F 250 °F 180 °F
Adhesive Tape Features
  • 2.0 mil. 300 acrylic adhesive
  • 4.0 mil. paper liner
  • Will not bleed into most paper stocks
  • Minimizes possible discoloration of posters and business forms
  • Medium solvent resistance
  • High initial adhesion
  • Good shear holding power to a variety of materials
Adhesive Tape Applications
  • Splicing of film, foils, fabrics
  • Laminating adhesive for foams, photos, fabrics, metal or plastic nameplates
  • Attaching gaskets and a variety of industrial foam materials
  • Corrugated plate mounting applications where repositionability and removability are not required
  • General purpose holding and mounting applications
Adhesive Tape Markets Served
Adhesive Tape Colors
  • Clear
Comparable products
Backing Adhesive Thickness Adhesion
 N/A   Acrylic   2.00mil   60.00oz/in 
Backing Adhesive Thickness Adhesion
 N/A   Acrylic   2.00mil   30.00oz/in 
Backing Adhesive Thickness Adhesion
 PET - Polyester   Acrylic   8.10mil   127.90oz/in 
Backing Adhesive Thickness Adhesion
 N/A   Acrylic   2.00mil   73.10oz/in 
Backing Adhesive Thickness Adhesion
 PVC - Polyvinylchloride   Acrylic   9.40mil   135.20oz/in 
Backing Adhesive Thickness Adhesion
 N/A   Acrylic   2.00mil   60.00oz/in 
Backing Adhesive Thickness Adhesion
 N/A   Acrylic   2.00mil   23.00oz/in 
Backing Adhesive Thickness Adhesion
 N/A   Acrylic   2.40mil   32.00oz/in 
Backing Adhesive Thickness Adhesion
 N/A   Acrylic   2.00mil   75.00oz/in 
Backing Adhesive Thickness Adhesion
 N/A   Acrylic   2.00mil   70.00oz/in 

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.


Choose the surface energy of the exact surface that the adhesive will contact (e.g. if the part was painted metal, paint would be the surface energy).