9103, Printable Repulpable Single-Coated Splicing Tape, 3M, adhesive tape datasheet

Home >

3M 9103
Printable Repulpable Single-Coated Splicing Tape

General Information

A 4.5 mil dark blue kraft paper backing coated with blue, repulpable adhesive on an easy release silicone liner. Packing in sealed plastic bags helps assures the moisture content of unused tape.

Backing	Adhesive (unwind)	Thickness (total)	Liner Type (outer)
Flatback Paper		4.50 mil

Adhesion to Steel 180° Peel	Adhesive Activation	Tensile Strength	Elongation Percent
	Pressure	22.00 lbs/in

Min Application Temp	Min Service Temp	Max Short-Term Temp	Max Long-Term Temp
40 °F	0 °F	400 °F

Adhesive Tape Features

Water and alkali dispersability are excellent and eliminate danger of contaminating the paper mill broke with non-repulpable material (Poor quality paper and plugged Fourdrinier screens often can be caused by typical non-repulpable, rubber base splicing media)
Kraft backing is untreated and readily accepts most inks and coatings
Repulability - Tape = completely; Liner = completely
High performance adhesive combines high initial adhesion with very good heat resistance to perform on the difficult surface of many "raw" LWC coatings
Complete repulpability splices and tape will not contaminate broke
Printable backing accepts most printing ink and/ or coatings
Good splices quickly
High strength splices
Performs through high temperature operations, including super-calendering and printing
Saves labor and increases value of scrap
Assures high quality printing and coating without flaking or print distortion

Adhesive Tape Applications

Taping the "lip" and "tail" of machine rereeler splices prior to off machine coating of fine papers
Taping the "lip" on web offset splices and the "lip" and "tail" on safety splices (especially on papers with LWC 'Light -Weight-Coated' coating formulations), particularly gravure papers
Butt splices
Alkaline coatings and with stearate sizing

Adhesive Tape Markets Served

Adhesive Tape Colors

Blue

Comparable products

3M 9103

Printable Repulpable Single-Coated Splicing Tape

Backing	Adhesive	Thickness	Adhesion
Flatback Paper		4.50mil	oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 25

tesa tape inc 4441

Repulpable, Single Faced Splicing Tape

Backing	Adhesive	Thickness	Adhesion
Crepe Paper	Acrylic	5.00mil	32.00oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Converting Options

Converting Services

Budnick Converting offers a number of services to take the product you need and make it perfect for your application. With converting methods ranging from precision slitting or die-cutting to printing and coating, Budnick has the capabilities to create anything you can dream up.

Services

Precision Cutting

Die-Cutting

Slitting

Printing

Adhesive Coating

Finishing and Spooling

Next Steps

Learn More About Budnick

Contact Us

View Case Studies

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.