9019, High Tack Double Coated Tape with 300 Adhesive, 3M, adhesive tape datasheet

Home >

3M 9019
High Tack Double Coated Tape with 300 Adhesive

General Information

This 1.1 mil. double coated tape features a thin polyester film for dimensional stability and improved handling with ease of die cutting and laminating. It has a high tack 300 adhesive which provides relatively high initial adhesion and good shear holding power to a variety of surfaces. This tape has a film carrier, which can add dimensional stability to foams and other substrates. The carrier also provides easier handling during slitting and die-cutting.

Backing	Adhesive (unwind)	Thickness (total)	Liner Type (outer)
PET - Polyester	Acrylic	1.10 mil	Paper (densified kraft, no print)

Adhesion to Steel 180° Peel	adhesion to steel 180° peel - liner side	Tensile Strength	Elongation Percent

Min Application Temp	Min Service Temp	Max Short-Term Temp	Max Long-Term Temp
40 °F	0 °F	150 °F	120 °F

Adhesive Tape Features

180° peel adhesion to aluminum foil = 33 oz./in.
90° peel adhesion to ABS = 24 oz./in.
90° peel adhesion to polycarbonate = 26 oz./in.
90° peel adhesion to polyester = 61 oz./in.
90° peel adhesion to polypropylene = 43 oz./in.
Relative solvent resistance
Medium UV resistance
"Hi-Strength" is a medium-firm acrylic 300 adhesive system which features both high initial adhesion and good high temperature holding power
High initial adhesion
Adds dimensional stabiltiy to foams and other substrates
Easier handling during slitting and die-cutting

Adhesive Tape Applications

Medical/ non-medical diagnostic test strips
Plastic film lamination/ bonding
Splicing
Foam lamination

Adhesive Tape Markets Served

Adhesive Tape Colors

Clear

Comparable products

3M 9019

High Tack Double Coated Tape with 300 Adhesive

Backing	Adhesive	Thickness	Adhesion
PET - Polyester	Acrylic	1.10mil	oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Converting Options

Converting Services

Budnick Converting offers a number of services to take the product you need and make it perfect for your application. With converting methods ranging from precision slitting or die-cutting to printing and coating, Budnick has the capabilities to create anything you can dream up.

Services

Precision Cutting

Die-Cutting

Slitting

Printing

Adhesive Coating

Finishing and Spooling

Next Steps

Learn More About Budnick

Contact Us

View Case Studies

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.